22L 600W Heat Power Ultrasonic Circuit Board Cleaner With Digital
How Hongsonic Ultrasonic Circuit Board Cleaner Work?
Ultrasonic cleaner for circuit boards and the technology works on
the rule of cavitation that occurs when small microscopic bubbles
formed, falls violently on the cleaning surface. Consistent
creation and falling in of the bubbles work as a scrubbing agent,
which in turn cleans the product.
Majority of the people have the wrong credence that the PCBs should
not be immersed in fluid; however it is not right.
For effective cleaning results, PCB or electronic part (to-be
cleaned) should be immersed in the tank filled with cleaning
solution. Later these should be cleaned in proper chemical cleaner
with water and dried up appropriately for safer outcomes.
The ultrasonic parts cleaner machine operates at the frequency of
20-400 Khz allowing safe cavitation cleaning action that reaches
all parts of the surface for cleaning the PCB.
The overall process hardly takes 10-15 minutes and saves your lot
of time and money since you can own this machine at a very
affordable price online.
Furthermore, one can rest assure about the protection of their
electronic parts as most of the units are provided with “auto
sweep” function that eliminates any potential damaging that other
way could be possible.
You can also use the cleaner to clear PCBS after wave bonding, so
you can easily begin after the bonding procedure. However, ensure
that you permit the boards to cool less than 70 degree before
beginning the cleaning process.
Detail Information Of HS-080D:
|Specifications for ultrasonic cleaner HS-080D|
A fresh batch of ultrasonic cleaning solution contains entrapped
air. You can see evidence of this by the bubbles that appear on the
inside of a glass of water standing at room temperature. This air
interferes with the cavitation process and must be driven off
before you begin the cleaning operation. To do this
The rising temperature coupled with the cleaning chemicals and
ultrasonic energy will speed the degassing operation and at the
same time thoroughly mix the contents of the tank.
When air bubbles no longer rise to the surface you are ready to
clean the parts. Place them in the mesh basket, taking care to keep
them from contacting each other. Lower the basket into the cleaning
solution and set the timer.
As you become experienced with ultrasonic cleaning PCBs and other
electronic components you’ll become more proficient and efficient.
The scientists at Tovatech are ready to help you reach this goal by
selecting the ultrasonic cleaner model, frequency, power and
cleaning solution that meets your requirements.